#IP CAMERA CLOUD RECORDING SERVICE 1080P#
#IP CAMERA CLOUD RECORDING SERVICE UPDATE#
#IP CAMERA CLOUD RECORDING SERVICE FULL#
#IP CAMERA CLOUD RECORDING SERVICE VERIFICATION#
#IP CAMERA CLOUD RECORDING SERVICE PASSWORD#

#IP CAMERA CLOUD RECORDING SERVICE FULL#

True Full HD quality with 150° wide angle views (1080p at 30 frames per second).

Works with the Google Assistant and Alexa.

Future-proofed with next-generation IPv6 support.

Wall/Ceiling mountable (hardware included).

Adjustable 360-degree base for optimal angle adjustment.

Built-in Bluetooth Low Energy technology for faster setup.

Supports WPA3™ - the latest WiFi security for more protection.

Support Continuous Recording on SD Card.

256 GB) / phone and ONVIF Profile S recording

Two-way audio with built-in microphone and speaker.

Enhanced sound and motion detection add new lines of defense to your home surveillance.

AI-based person detection intelligently identifies human motion.

IR night vision up to 5m (16 ft.) lets you see what's happening even in total darkness.

#IP CAMERA CLOUD RECORDING SERVICE 1080P#

Cinematic Full HD 1080p resolution 30 frames per second with 120-degree field-of-view.

Select enter, click on the model number of the NVR or DVR and Start Live view! You can view all of your cameras that are configured with your NVR or DVR.See your home in cinematic detail with Full HD 1080p resolution and let advanced AI-based person detection alert you to motion that matters.

#IP CAMERA CLOUD RECORDING SERVICE VERIFICATION#

Go to the plus button on the model number and enter in the verification code that is on the attached monitor in the same screen where the QR code is.

It will show the NVR or DVR on your device.

Just like you did with the camera, go to the Circle in the top right and scan the QR code that is displayed on the attached monitor.

You will need your phone or tablet at this time and you will need to be logged into the Cloud P2P account.

On the same page you will see Platform Access, make sure that enable is checked.

Toward the bottom you will need to change the Preferred DNS Server to 8.8.8.8 and the Alternate DNS Server to 8.8.4.4.

Now that you are logged in, go to Configuration and select Network on the left side.

#IP CAMERA CLOUD RECORDING SERVICE PASSWORD#

Enter your username and password for the NVR or DVR.

On your attached monitor you will need to right click and select Menu.

Initial Setup for your H Series NVR / DVR If you have not and you need assistance please follow this link to our helpful guide: It will be the same process as adding a camera but this time you will need to have a monitor attached to the NVR or DVR.Īt this point we are assuming that you have already set up your NVR or DVR. Now that you know how simple it is to set up your camera on the Cloud P2P, let’s add an NVR or DVR. Step Five Step Six fi Step Seven Cloud P2P With NVR / DVR New Device will show up with a nine digit number and below that you will see your camera model.

Scan the QR code that is displayed on your computer screen.

In the account you will go to the circle in the top right to access the QR Code Scanner.

If Enable is not checked for Platform Access, click that and select save.Īdding the Camera to the Cloud P2P Account

In Advanced Settings go to Platform Access and make sure your phone or tablet is ready and logged into the Cloud P2P account that was created in the previous section.

Save that and go to Advanced Settings under Network.

In the 'Preferred DNS Server' type '8.8.8.8,' and in 'Alternate DNS Server' type '8.8.4.4.'

At the bottom of the Network tab, you will find Preferred and Alternate DNS Server.

Go to the Configuration menu on the camera's interface, then to the Network tab.

#IP CAMERA CLOUD RECORDING SERVICE UPDATE#

If you are in need of the firmware to update your camera please check our website for the latest firmware.Īfter this, your camera should be up to date and you can now add the camera to Cloud P2P by following these steps: You can locate the firmware under configuration, head over to system then system settings. Your camera will need Firmware Version 5.4.1 or above in order for you to access the camera on your Cloud P2P account. For this demonstration I am using camera model NSC-204-BT.īefore you can add the camera to your Cloud P2P account you will need to check and make sure you have the correct firmware. We’re going to start off with using Cloud P2P on an IP camera. Assigning an IP Address to your IP Camera.This guide assumes that you have already configured your IP address for your camera or NVR/DVR, if not and you need some help, please refer to this guide. Enter in that verification code that was sent to your email and you will be taken to set up a username and password for the account.Ĭongratulations! You have just set up your Cloud P2P account!.

You will receive an email with a verification code to start your account.

Enter in the email that you would like to use, the verification code on the right side of the verification code line, and then select get verification code.

Ip camera cloud recording service